Recommend Audio System
    
  • Full Range ELA-082

    ELA-082 Full Range

    • Two 8" 50mm voice coil MFLF speakers with refined cone, voice coil and spider which extremely reduce the distortion and ensure the charming tone during high power operation. • CELESTION HF driver, high directivity horn together with the crossover of the processor avoid the tone loss and keep high sensitivity, accurate MF performance and excellent HF resolution. • Heat resistant glass fiber bobbin and heat resitant OFC winding voice coil; • Even slot improves the surround mechanical strength. The damping glue improves the speaker load capacity during high dynamic and high power. • HF unit uses NdFeB magnet,1" throat and high directivity horn for flat HF response, high penetration and farther transmission.

    More »
  • Full Range ELA-121

    ELA-121 Full Range

    • Refined HF & MFLF speakers. • 12" MFLF unit uses 75mm voice coil and NdFeB magnet for light weight, high sensitivity, low distortion, wide frequency response and charming tone. • Parallel magnet loop of HF speaker for better heat dissipation and sufficient magnetic flux. • Polymer HF diaphragm for soft HF performance. • Wide and deep BMC horn sufficiently amplifies the HF sound pressure, extends the transmission distance and controls the directivity. • Speaker system and crossover avoid the tone loss and keep high sensitivity, accurate MF performance and HF resolution.

    More »
  • Subwoofer ELA-181SUB

    ELA-181SUB Subwoofer

    • The suspension part of ELA-181SUB matches with that of the vertical dimension of ELA-082/ELA-121 full range speaker cabinet and can be connected together. When more quantity is needed, ELA-082/ELA-121 and ELA-181SUB can also be suspended in one line independently, e.g. ELA-082/ELA-121 one line, 4 ELA-181SUB one line for stage left channel, and the same way for the right channel. • Refined 18 inch cone sub unit, aeronautic magnet; The vented design and the open chamber achieve horn effect. The vented bass audio wave overlaps with the speaker positive audio wave and come out after being compressed in the front chamber to improve the bass transmission energy, sound pressure and bass strength.

    More »
  • Full Range ELV-101

    ELV-101 Full Range

    • This 10 inch full range professional speaker (with one 34mm HF) uses refined cone, voice coil and spider. • CELESTION HF driver for high sensitivity, rich bass, wide vocal, charming and clear MFHF to suit for Karaoke application. • The unit structure consists of one 10 inch 65mm voice coil cone woofer and one 34mm ferrite magnet tweeter. The woofer uses 65mm CCA winding voice coil which is made of refractory glass fiber bobbin for high sensitivity and reliable performance. • Adopts symmetric magnet design to reduce the second harmonic distortion. • HF unit uses one inch compressed throat and PVC horn offering better damping factor and flat delicate treble. • The crossover uses extremely low consumption OFC inductor, high quality capacitor, Al housing resistor and heat sink to assure the crossover network stability. • Trapezoidal enclosure eliminates the standing wave inside and improves the bass pureness.

    More »
  • Full Range ELV-121

    ELV-121 Full Range

    • ELV-121 professional speaker cabinet uses one 12 inch woofer with refined cone/voice coil/spider and one B&C HF driver to offer high sensitivity, rich and powerful bass, clear and charming MFHF. • The unit structure consists of one 12 inch 75mm voice coil cone woofer and one 44mm ferrite magnet HF. • The woofer uses 75mm CCA winding voice coil which is made of refractory glass fiber bobbin for high efficiency and reliable performance and adopts symmetric magnet circuit design to reduce second harmonic distortion. • The HF unit uses 1 inch throat and Al horn to offer flat and delicate treble when amplifying the HF sound pressure. • The Al horn features solid structure, anti-vibration and excellent acoustic features. • The crossover uses extremely low consumption OFC inductor, high quality capacitor, Al housing resistor and heat sink to assure the crossover network stability. • Trapezoidal enclosure eliminates the standing wave inside and improves the bass pureness.

    More »
  • Full Range ELV-121M

    ELV-121M Full Range

    • The unit structure consists of one 12 inch 75mm voice coil cone woofer and one HF unit(ferrite magnet, 44mm voice coil). • The woofer uses refractory voice coil for reliable performance, CONEX spider for durable performance and symmetric magnet circuit to extremely reduce the odd-order harmonic distortion. • The HF unit uses 1 inch throat and Al horn for flat treble, bright and delicate penetrating tone when amplifying the HF sound pressure. • Al horn features anti-vibration, solid structure and excellent acoustic features. • The crossover uses extremely low consumption OFC inductor, high quality capacitor, Al housing resistor and heat sink to assure the crossover network stability. • Irregular enclosure ensures the suitable radiation angle and eliminates the standing wave inside and improves the bass pureness.

    More »
  • Full Range ELV-151

    ELV-151 Full Range

    • The unit structure consists of one 15 inch woofer and one B&C HF driver. • The 15 inch woofer uses UKM cone, refractory voice coil and refined spider. • High sensitivity, powerful bass, clear and charming MFHF suits for entertainment applications. • The woofer uses rigid UKM cone to reproduce natural instrument tone, powerful bass, low distortion, vivid, natural and penetrating vocal. • 44mm B&C HF unit features flat & delicate treble and wide MF. • One inch throat and big Al horn offers flat, bright and delicate treble when amplifying the HF sound pressure. The Al horn features solid structure, anti- vibration and excellent acoustic features. • The crossover uses extremely low consumption OFC inductor, high quality capacitor, Al housing resistor and heat sink to assure the crossover network stability. • Trapezoidal enclosure eliminates the standing wave inside and improves the bass pureness

    More »
  • Full Range ELV-151M

    ELV-151M Full Range

    • ELV-151M consists of one 15 inch 75mm cone woofer and one 65mm Ti diaphragm HF compression driver • The woofer uses 75mm CCA winding voice coil which is made of heat-resistant glass fiber bobbin for high efficiency and reliable performance • Waterproof cone for outdoor performance • Flat high frequency, delicate and soft tone • The crossover uses extremely low consumption OFC inductor, high quality XPP capacitor and heat dissipation resistor to keep reliable performance and prominent tone • Trapezoidal enclosure eliminates the standing wave and provides pure bass and flat frequency response. 45°foldback angle suits for stage monitoring

    More »
  • Subwoofer ELV-181SUB

    ELV-181SUB Subwoofer

    • ELV-181SUB uses one 18 inch 220 magnet high quality subwoofer with 100mm refractory voice coil and stiff cone. • Elegant contour, high sensitivity and rich powerful bass suits for indoor entertainment applications. • The cabinet uses 18mm plywood and its baffle uses 25mm plywood, with painting finish for anti-moisture • Designed with four rubber feet to prevent from moving in wide dynamic operation. • Powerful and elastic bass offers wide sound field when used with full range speaker cabinet. • The speaker uses high quality aerospace magnet to ensure high magnetic flux density. • Refractory voice coil keeps reliable performance under high power and long time operation, cone with special glue improves the stiffness and anti-moisture function, suitable surround ensures the elastic vibration and excellent transient response meanwhile reduces the distortion.

    More »
  • Full Range EKS-081

    EKS-081 Full Range

    • The unit structure consists of one 8 inch 50mm cone woofer and a 36mm ferrite magnet steel HF unit. • The woofer uses refractory glass fiber bobbin and 50mm CCA winding coil for high efficiency and reliable performance, symmetric magnet circuit design reduces the second harmonic distortion. • The HF unit uses 1 inch throat and PEEK diaphragm for flat and bright treble. The horn uses solid industrial plastic for anti-vibration performance, with the tweeter together to offer bright and penetrating tone. • PEEK diaphragm has excellent mechanical performance, anti-abration and anti- erosion, and can stand 250 degree temperature during long time operation. • Trapezoidal enclosure eliminates standing wave inside. • 15mm MDF enclosure with black painting finish for anti-moisture; Al socket for pole mounting.

    More »
  • Full Range EKS-101

    EKS-101 Full Range

    • EKS-101 2 way full range speaker cabinet uses plane wave guide technology, the sound wave phase delay transmission and sound wave phase inversion overlaps for solving the phase distortion. • The speaker cabinet features high sensitivity, clear and charming tone, wide and natural vocal. • EKS-101 consists of one 10 inch cone woofer and a 36mm PEEK diaphragm HF unit (CCA winding). • The woofer uses refractory glass fiber bobbin 50mm CCA winding voice coil for high efficiency and reliable performance. Symmetric magnet circuit design reduces the second harmonic distortion. • The HF unit uses 1 inch throat and PEEK diaphragm for flat and bright treble. • PEEK diaphragm has excellent mechanical performance, anti-abration and anti-erosion, and can stand 250 degree temperature during long time operation. • Trapezoidal enclosure eliminates standing wave inside. • 15mm MDF enclosure with black painting finish for anti-moisture. • Designed with a handle for convenient transportation and Al socket for convenient pole mounting. • Multiple flying points for flexible applications.

    More »
  • Full Range EKS-121

    EKS-121 Full Range

    • EKS-121 full range speaker uses 120 magnet 44mm PI diaphragm and Al winding HF unit, the HF unit can stand high power operation for a long time, natural and clear tone, accurate phase and flat frequency response after matched with subwoofer. • PI HF refractory diaphragm stands 290℃ for a long time and 490℃ for a short time, it features excellent mechanical and electrical performance, durable and fireproof. • EKS-121 uses built-in 2 way crossover and plane wave guide technology, the sound wave phase delay transmission and sound wave phase inversion overlaps for solving the phase distortion. • High sensitivity, charming tone, clear & rich vocal, bright MFHF. • The woofer uses 65mm Al winding for light weight and high efficiency. Symmetric magnet circuit design reduces the second harmonic distortion. • Trapezoidal enclosure eliminates standing wave inside. • 18mm MDF enclosure with black painting finish for anti-moisture. • Designed with a handle for convenient transportation and Al socket for convenient pole mounting. • Multiple flying points for flexible applications.

    More »
  • Full Range EKS-151

    EKS-151 Full Range

    • EKS-151 full range speaker uses UKM cone for natural sound reproduction, low distortion, powerful bass, vivid and penetrating vocal. • HF unit uses PI diaphragm and 44mm 120 magnet for flat HF response and bright tone. The HF unit matches LF unit to offer wide sound range on music or vocal. • PI diaphragm stands 290℃ for a long time and 490℃ for a short time, it features excellent mechanical and electrical performance, durable and fireproof. • EKS-151 uses built-in 2 way crossover, impedance compensation circuit is added for the LF part of the crossover to improve the frequency response flatness and the tone pureness. • The crossover components use low consumption polypropylene capacitors, OFC inductors and Al housing resistors for better performance. • Trapezoidal enclosure eliminates standing wave inside. • 18mm MDF enclosure with black painting finish for anti-moisture. • Designed with a handle for convenient transportation and Al socket for convenient pole mounting. • Multiple flying points for flexible applications.

    More »
  • Full Range EKS-152

    EKS-152 Full Range

    • EKS-152 uses dual HF units, one 51mm Ti diaphragm CCA winding HF unit and one 34mm Ti diaphragm tweeter to endure the high power operation • 34mm HF unit mainly compensates HF and ultra HF to offer bright, delicate tone and to extend the vocal range. • Ti diaphragm features light weight, high strength, high anti-erosion capacity, anti- high-temperature, anti-low-temperature, anti-acid, anti-alkaline • The speaker cabinet features clear bass and clear vocal, and uses acoustic foam and vented hole to improve bass clearness • The trapezoid enclosure eliminates standing wave,18mm plywood cabinet with black paint for anti-moisture,4 handles for easy transportation,4 pin speaker connector, 4 feet for anti-vibration

    More »
  • Subwoofer EKS-181SUB

    EKS-181SUB Subwoofer

    • EKS-181SUB is a high power vented tube subwoofer which uses long stroke voice coil for high efficiency. • 100mm voice coil 220mm magnet 18 inch 8Ω speaker is designed with damping processing cone and assembled reversely in the cabinet to make the bass more clear and powerful. The cabinet is designed with compression horn structure to boost sensitivity, thus to suit for powerful but elastic bass applications. • The cabinet uses 18mm plywood with black paint finish and is equipped with 4 handles for easy transportation, 4 pin speaker connector for convenient linking, 4 rubber feet for anti-vibration and Al socket for convenient pole mounting.

    More »
  • Subwoofer EKS-182SUB

    EKS-182SUB Subwoofer

    • EKS-182SUB is a high power vented tube dual 18 inch subwoofer which uses long stroke high efficiency 100mm voice coil 220mm magnet 8Ωspeakers. • The two speakers are designed with damping processing cone and assembled reversely in the cabinet to make the bass more clear and powerful. • The cabinet is designed with compression horn structure to boost the sensitivity, thus to suit for powerful but elastic bass applications. • The cabinet uses 18mm plywood with black painting finish and is equipped with 8 handles for easy transportation, one 4 pin speaker connector and 5 foot pads for anti-vibration. Note: as the speaker is assembled reversely in the cabinet, please adjust the sub-frequency output phase to 180 degree on the audio processor during operation

    More »
  • KTV Speaker EKT-081

    EKT-081 KTV Speaker

    • EKT-081 is the high quality Karaoke speaker cabinet specially designed for KTV and home Karaoke which features prominent vocal and music performance • The vented tube and acoustic foam match with the cabinet volume perfectly, which boosts the bass performance. • The woofer uses excellent damping factor and rigid cone to avoid distortion in different frequency band operation. • The anti-erosive and elastic foam surround ensures that the speaker can endure severe amplitude and dynamic. • The 3 inch tweeter uses hi-fi cone to offer flat MFHF response, hi-fi vocal and music performance, and refractory voice coil to endure long time music power. • The refined crossover components offer accurate MF and bright HF during high SPL KTV operation.

    More »
  • KTV Speaker EKT-101

    EKT-101 KTV Speaker

    • EKT-101 is the high quality 10 inch Karaoke speaker cabinet specially designed for KTV and home Karaoke audio system. • EKT-101 features prominent vocal, clean and rich bass, flat and delicate treble, together use with Takstar tailored microphone and Karaoke power amplifier to offer high quality music and tone. • The vented tube and acoustic foam match with the accurately designed cabinet to boost powerful bass effect. • The speaker uses excellent damping factor and rigid cone to avoid distortion in different frequency band operation. • Adopts anti-fatigue and elastic foam surround. • Six layer winding voice coil features high inductive reactance for pure and gentle bass effect. • Three magnet structure strengthens the magnetic field induction-intensity and reduces the voice coil non-linear distortion under large dynamic. • The HF unit uses 3 inch hi-fi cone to offer flat frequency response and hi-fi vocal and music; the refractory voice coil offers delicate HF tone and bears long time music power; the refined crossover components offer accurate MF tone and bright HF to offer satisfied MFHF performance without burrs.

    More »
  • KTV Speaker EKT-102

    EKT-102 KTV Speaker

    • EKT-102 uses two 10 inch woofers. The 38mm Al voice coil features excellent heat dissipation, light weight, better sensitivity and reliable performance • Rigid and light weight cone for high SPL and low distortion performance • Scientific design of foam surround and durable spider for reliable performance under wide dynamic without non-linear distortion • The magnet loop system uses aerospace magnet steel, 10# T yoke and washer to boost the magnetic conductivity and magnetic flux • The HF driver uses high polymer diaphragm to offer soft treble and flat frequency response • The compression structure and PF horn boost the efficiency, sensitivity and the sound penetration. • The high quality crossover components well connect the crossover frequencies of woofer and tweeter to offer consistent phase and prominent tone

    More »
  • KTV Speaker EKT-121

    EKT-121 KTV Speaker

    • EKT-121 high quality 3 way Karaoke speaker cabinet uses dual HF, dual MF and one 12 inch LF configuration. Prominent vocal, pure and rich bass, flat and delicate treble. • The crossover uses low consumption resistor, high quality polypropylene capacitor and OFC inductor to reduce the audio quality loss. • Woofer uses excellent damping factor, rigid and low distortion cone. • Adopts anti-fatigue and elastic foam surround. • The magnet circuit adopts dual magnets and low carbon steel T yoke/washer to strengthen the magnetic field induction-intensity and reduces the voice coil non- linear distortion under large dynamic.

    More »
  • EKAX Series EKAX-1A

    EKAX-1A EKAX Series

    • Anti-vibration structure • Complete protection circuit for speaker system/overload/high temperature/ short circuit protection • Volume limit device limits the maximum volume to avoid the misoperation • Dual echoes function(can be switched to one echo) features stereo echo effect to extend the microphone vocal echo width • Feedback suppression function avoids howling • 3 band EQ for microphone and music • Recording and music playing function for convenient connection with the external power amplifier and recording production • Designed with effect output connector for convenient connection with the external effect • Remote control for convenient adjustment(microphone and music volume adjusting /input selection/mute) • Parallel output design of A/B two groups enable to connect 2 pairs of 6-8Ω speaker cabinets when power allowed

    More »
  • EKAX Series EKAX-2A

    EKAX-2A EKAX Series

    • Anti-vibration structure • Complete protection circuit for speaker system/overload/high temperature/short circuit protection • Volume limit device limits the maximum volume to avoid the misoperation • Dual echoes function(can be switched to one echo) features stereo echo effect to extend the microphone vocal echo width • Feedback suppression function avoids howling • 3 band EQ for microphone and music • Recording and music playing function for convenient connection with the external power amplifier and recording production • Designed with effect output connector for convenient connection with the external effect • Remote control for convenient adjustment(microphone and music volume adjusting /input selection/mute) • Parallel output design of A/B two groups enable to connect 2 pairs of 6-8Ω speaker cabinets when power allowed

    More »
  • EKAX Series EKAX-3A

    EKAX-3A EKAX Series

    • Anti-vibration structure • Complete protection circuit for speaker system/overload/high temperature/short circuit protection • Volume limit device limits the maximum volume to avoid the misoperation • Dual echoes function(can be switched to one echo) features stereo echo effect to extend the microphone vocal echo width • Feedback suppression function avoids howling • 3 band EQ for microphone and music • Recording and music playing function for convenient connection with the external power amplifier and recording production • Designed with effect output connector for convenient connection with the external effect • Remote control for convenient adjustment(microphone and music volume adjusting /input selection/mute) • Parallel output design of A/B two groups enable to connect 2 pairs of 6-8Ω speaker cabinets when power allowed

    More »
  • EKA Series EKA-3A

    EKA-3A EKA Series

    • EKA series power amplifier consists of EKA-3A,EKA-6A,EKA-8A,EKA-12A,EKA-13A, EKA-403 and EKA-406 • EKA-3A,EKA-6A,EKA-8A,EKA-403 and EKA-406 are 2U, EKA-12A and EKA-13A are 3U • EKA-3A,EKA-6A,EKA-8A,EKA-12A and EKA-13A are 2 channels, EKA-403 and EKA-406 are 4 channels • EKA-3A,EKA-6A,EKA-8A features excellent LF effect extension, wide HF extension and balanced LF/MF/HF. Low distortion and wide frequency response music performance • EKA-12A features rich and powerful bass, bright MFHF. Suitable for dual 15 inch speaker cabinets and single 18 inch subwoofer • EKA-13A features rich and powerful low frequency, suitable for dual 18 inch subwoofers • EKA-403 is a combination of two EKA-3A for improving the practicability and reducing the amplifier usage quantity, suitable for 8 inch and 10 inch speaker cabinets • EKA-406 is a combination of one EKA-3A and one EKA-6A for improving the practicability and reducing the amplifier usage quantity, A and B channels are suitable for two 12 inch, or four 10 inch/8 inch speaker cabinets, C and D channels are suitable for two/four 8 inch, or two 10 inch speaker cabinets

    More »
  • EKA Series EKA-6A

    EKA-6A EKA Series

    • EKA series power amplifier consists of EKA-3A,EKA-6A,EKA-8A,EKA-12A,EKA-13A, EKA-403 and EKA-406 • EKA-3A,EKA-6A,EKA-8A,EKA-403 and EKA-406 are 2U, EKA-12A and EKA-13A are 3U • EKA-3A,EKA-6A,EKA-8A,EKA-12A and EKA-13A are 2 channels, EKA-403 and EKA-406 are 4 channels • EKA-3A,EKA-6A,EKA-8A features excellent LF effect extension, wide HF extension and balanced LF/MF/HF. Low distortion and wide frequency response music performance • EKA-12A features rich and powerful bass, bright MFHF. Suitable for dual 15 inch speaker cabinets and single 18 inch subwoofer • EKA-13A features rich and powerful low frequency, suitable for dual 18 inch subwoofers • EKA-403 is a combination of two EKA-3A for improving the practicability and reducing the amplifier usage quantity, suitable for 8 inch and 10 inch speaker cabinets • EKA-406 is a combination of one EKA-3A and one EKA-6A for improving the practicability and reducing the amplifier usage quantity, A and B channels are suitable for two 12 inch, or four 10 inch/8 inch speaker cabinets, C and D channels are suitable for two/four 8 inch, or two 10 inch speaker cabinets

    More »
  • EKA Series EKA-8A

    EKA-8A EKA Series

    • EKA series power amplifier consists of EKA-3A,EKA-6A,EKA-8A,EKA-12A,EKA-13A, EKA-403 and EKA-406 • EKA-3A,EKA-6A,EKA-8A,EKA-403 and EKA-406 are 2U, EKA-12A and EKA-13A are 3U • EKA-3A,EKA-6A,EKA-8A,EKA-12A and EKA-13A are 2 channels, EKA-403 and EKA-406 are 4 channels • EKA-3A,EKA-6A,EKA-8A features excellent LF effect extension, wide HF extension and balanced LF/MF/HF. Low distortion and wide frequency response music performance • EKA-12A features rich and powerful bass, bright MFHF. Suitable for dual 15 inch speaker cabinets and single 18 inch subwoofer • EKA-13A features rich and powerful low frequency, suitable for dual 18 inch subwoofers • EKA-403 is a combination of two EKA-3A for improving the practicability and reducing the amplifier usage quantity, suitable for 8 inch and 10 inch speaker cabinets • EKA-406 is a combination of one EKA-3A and one EKA-6A for improving the practicability and reducing the amplifier usage quantity, A and B channels are suitable for two 12 inch, or four 10 inch/8 inch speaker cabinets, C and D channels are suitable for two/four 8 inch, or two 10 inch speaker cabinets

    More »
  • EKA Series EKA-12A

    EKA-12A EKA Series

    • EKA series power amplifier consists of EKA-3A,EKA-6A,EKA-8A,EKA-12A,EKA-13A, EKA-403 and EKA-406 • EKA-3A,EKA-6A,EKA-8A,EKA-403 and EKA-406 are 2U, EKA-12A and EKA-13A are 3U • EKA-3A,EKA-6A,EKA-8A,EKA-12A and EKA-13A are 2 channels, EKA-403 and EKA-406 are 4 channels • EKA-3A,EKA-6A,EKA-8A features excellent LF effect extension, wide HF extension and balanced LF/MF/HF. Low distortion and wide frequency response music performance • EKA-12A features rich and powerful bass, bright MFHF. Suitable for dual 15 inch speaker cabinets and single 18 inch subwoofer • EKA-13A features rich and powerful low frequency, suitable for dual 18 inch subwoofers • EKA-403 is a combination of two EKA-3A for improving the practicability and reducing the amplifier usage quantity, suitable for 8 inch and 10 inch speaker cabinets • EKA-406 is a combination of one EKA-3A and one EKA-6A for improving the practicability and reducing the amplifier usage quantity, A and B channels are suitable for two 12 inch, or four 10 inch/8 inch speaker cabinets, C and D channels are suitable for two/four 8 inch, or two 10 inch speaker cabinets

    More »
  • EKA Series EKA-13A

    EKA-13A EKA Series

    • EKA series power amplifier consists of EKA-3A,EKA-6A,EKA-8A,EKA-12A,EKA-13A, EKA-403 and EKA-406 • EKA-3A,EKA-6A,EKA-8A,EKA-403 and EKA-406 are 2U, EKA-12A and EKA-13A are 3U • EKA-3A,EKA-6A,EKA-8A,EKA-12A and EKA-13A are 2 channels, EKA-403 and EKA-406 are 4 channels • EKA-3A,EKA-6A,EKA-8A features excellent LF effect extension, wide HF extension and balanced LF/MF/HF. Low distortion and wide frequency response music performance • EKA-12A features rich and powerful bass, bright MFHF. Suitable for dual 15 inch speaker cabinets and single 18 inch subwoofer • EKA-13A features rich and powerful low frequency, suitable for dual 18 inch subwoofers • EKA-403 is a combination of two EKA-3A for improving the practicability and reducing the amplifier usage quantity, suitable for 8 inch and 10 inch speaker cabinets • EKA-406 is a combination of one EKA-3A and one EKA-6A for improving the practicability and reducing the amplifier usage quantity, A and B channels are suitable for two 12 inch, or four 10 inch/8 inch speaker cabinets, C and D channels are suitable for two/four 8 inch, or two 10 inch speaker cabinets

    More »
  • EKA Series EKA-403

    EKA-403 EKA Series

    • EKA series power amplifier consists of EKA-3A,EKA-6A,EKA-8A,EKA-12A,EKA-13A, EKA-403 and EKA-406 • EKA-3A,EKA-6A,EKA-8A,EKA-403 and EKA-406 are 2U, EKA-12A and EKA-13A are 3U • EKA-3A,EKA-6A,EKA-8A,EKA-12A and EKA-13A are 2 channels, EKA-403 and EKA-406 are 4 channels • EKA-3A,EKA-6A,EKA-8A features excellent LF effect extension, wide HF extension and balanced LF/MF/HF. Low distortion and wide frequency response music performance • EKA-12A features rich and powerful bass, bright MFHF. Suitable for dual 15 inch speaker cabinets and single 18 inch subwoofer • EKA-13A features rich and powerful low frequency, suitable for dual 18 inch subwoofers • EKA-403 is a combination of two EKA-3A for improving the practicability and reducing the amplifier usage quantity, suitable for 8 inch and 10 inch speaker cabinets • EKA-406 is a combination of one EKA-3A and one EKA-6A for improving the practicability and reducing the amplifier usage quantity, A and B channels are suitable for two 12 inch, or four 10 inch/8 inch speaker cabinets, C and D channels are suitable for two/four 8 inch, or two 10 inch speaker cabinets

    More »
  • EKA Series EKA-406

    EKA-406 EKA Series

    • EKA series power amplifier consists of EKA-3A,EKA-6A,EKA-8A,EKA-12A,EKA-13A, EKA-403 and EKA-406 • EKA-3A,EKA-6A,EKA-8A,EKA-403 and EKA-406 are 2U, EKA-12A and EKA-13A are 3U • EKA-3A,EKA-6A,EKA-8A,EKA-12A and EKA-13A are 2 channels, EKA-403 and EKA-406 are 4 channels • EKA-3A,EKA-6A,EKA-8A features excellent LF effect extension, wide HF extension and balanced LF/MF/HF. Low distortion and wide frequency response music performance • EKA-12A features rich and powerful bass, bright MFHF. Suitable for dual 15 inch speaker cabinets and single 18 inch subwoofer • EKA-13A features rich and powerful low frequency, suitable for dual 18 inch subwoofers • EKA-403 is a combination of two EKA-3A for improving the practicability and reducing the amplifier usage quantity, suitable for 8 inch and 10 inch speaker cabinets • EKA-406 is a combination of one EKA-3A and one EKA-6A for improving the practicability and reducing the amplifier usage quantity, A and B channels are suitable for two 12 inch, or four 10 inch/8 inch speaker cabinets, C and D channels are suitable for two/four 8 inch, or two 10 inch speaker cabinets

    More »
  • ELV Series ELV-3A

    ELV-3A ELV Series

    • This series of power amplifier is specially designed according to Hi-Fi standard for ELV series speaker cabinet, the high power transistors are divided into left and right groups for improving the heat dissipation • Adopts metal housing transistor(excellent stability, heat dissipation and sound quality) and high quality components, wide sound field, clear LF/MF/HF, detailed and bright sound effect • ELV-3A power amplifier(350W*2CH) matches with ELV-101 speaker cabinet • It automatically shuts down the pre-noise when there is no signal and optimizes the sound effect according to the actual requirement based on the speaker cabinet features • Adjustable 70Hz gain knob is designed on the rear panel for boosting the bass • The front metal grille is fixed by magnets for easy dust cleaning • Designed with Class AB circuit, each channel circuit is internally bridged (equals to dual built-in Class AB circuits) to amplify the output power, so the output can not be bridged

    More »
  • ELV Series ELV-5A

    ELV-5A ELV Series

    • This series of power amplifier is specially designed according to Hi-Fi standard for ELV series speaker cabinet, the high power transistors are divided into left and right groups for improving the heat dissipation • Adopts metal housing transistor(excellent stability, heat dissipation and sound quality) and high quality components, wide sound field, clear LF/MF/HF, detailed and bright sound effect • ELV-5A power amplifier(500W*2CH) matches with ELV-121 speaker cabinet • It automatically shuts down the pre-noise when there is no signal and optimizes the sound effect according to the actual requirement based on the speaker cabinet features • Adjustable 70Hz gain knob is designed on the rear panel for boosting the bass • The front metal grille is fixed by magnets for easy dust cleaning • Designed with Class AB circuit, each channel circuit is internally bridged (equals to dual built-in Class AB circuits) to amplify the output power, so the output can not be bridged

    More »
  • ELV Series ELV-7A

    ELV-7A ELV Series

    • This series of power amplifier is specially designed according to Hi-Fi standard for ELV series speaker cabinet, the high power transistors are divided into left and right groups for improving the heat dissipation • Adopts metal housing transistor(excellent stability, heat dissipation and sound quality) and high quality components, wide sound field, clear LF/MF/HF, detailed and bright sound effect • ELV-7A power amplifier(700W*2CH) matches with ELV-151 speaker cabinet • It automatically shuts down the pre-noise when there is no signal and optimizes the sound effect according to the actual requirement based on the speaker cabinet features • Adjustable 70Hz gain knob is designed on the rear panel for boosting the bass • The front metal grille is fixed by magnets for easy dust cleaning • Designed with Class AB circuit, each channel circuit is internally bridged (equals to dual built-in Class AB circuits) to amplify the output power, so the output can not be bridged

    More »
  • ELV Series ELV-12A

    ELV-12A ELV Series

    • This series of power amplifier is specially designed according to Hi-Fi standard for ELV series speaker cabinet, the high power transistors are divided into left and right groups for improving the heat dissipation • Adopts metal housing transistor(excellent stability, heat dissipation and sound quality) and high quality components, wide sound field, clear LF/MF/HF, detailed and bright sound effect • ELV-12A power amplifier(1200W*2CH) matches with ELV-181USB speaker cabinet • It automatically shuts down the pre-noise when there is no signal and optimizes the sound effect according to the actual requirement based on the speaker cabinet features • Adjustable 70Hz gain knob is designed on the rear panel for boosting the bass • The front metal grille is fixed by magnets for easy dust cleaning • Designed with Class AB circuit, each channel circuit is internally bridged (equals to dual built-in Class AB circuits) to amplify the output power, so the output can not be bridged.

    More »
  • Pre-effecter EKX-4A

    EKX-4A Pre-effecter

    • Optical fiber coaxial signal input ensures original signal reproduction • 10 band GEQ and 3 band PEQ for music and microphone • 7 band GEQ and 3 band PEQ for fill channel • Quick switching of professional menu and standard menu for convenient operation • Designed with FEEDBACK prevention function button • Turning-on mode lock function for locking the music/vocal effect and volume • Memory function button for saving the adjusted effect for next operation

    More »
  • Processor EKX-3A

    EKX-3A Processor

    • Both input and output are with delay, adopts Bessel filters and Shelf filters. The output is designed with delay, HPF/LPF and RMS limiter • Parametric EQ: each input channel has 5 filters which can be designed as Bessel filters or Shelf filters, each output channel has 7 filters which can be designed as Bessel filters or Shelf filters • Filter type: symmetric Bessel or high/low Shelf pass filter can be extended to second order filter • Filter gain: Bessel and Shelf filter gain adjusting range: -15dBu~+15dBu, stepping accuracy:0.5dBu • Central frequency: 1/24octave stepping accuracy within 20Hz~20kHz frequency range • Filter Q factor/band width: range: 0.05~3,stepping accuracy:0.05(dB/oct) • High pass filter: frequency: 20Hz~20kHz Slope: -6dB/Oct to -24dB/Oct for option(type: Butterworth/Linkwitz-Riley/Bessel for option) • Low pass filter: frequency: 20Hz~20kHz Slope: -6dB/Oct to -24dB/Oct for option(type: Butterworth/Linkwitz-Riley/Bessel for option) • Limit: RMS limiter • Attack threshold: range: 20dBu~-10dBu • Attack time range: 5mS~200mS, stepping accuracy 1mS within range 5mS~20mS, stepping accuracy 10mS within range 20mS~100mS, stepping accuracy 20mS within range 100mS~200mS • Release time range: 0.1S~3S,stepping accuracy:0.1S • Peak delay: 848.998mS,stepping accuracy:21uS

    More »
  • Digital Central Controller EBS-1C

    EBS-1C Digital Central Controller

    • SCM control, single key shuttle, graphic interface, multi-level menu operation mode • True color 3.0 inch TFT display for intuitive operating status • Switchable Simplified Chinese/Traditional Chinese/English language • 2GB memory, max 32G SD card • Supports weekly timing program and special date timing program • Supports linking with the PC for editing the timing program, fully automatic power supply, PA zone management • High precision Maxim RTC clock for timing accuracy up to second • Fire linkage function for playing the fire alarm music file • Supports linking with the external power sequencer and controls the external equipments by short circuit signal output • Supports local PA paging and tele-mic-paging • Paging controlled by power supply shortcut key, easy and intuitive operation • Timing playing the program in memory/SD card, 8CH audio timing outputs, 3CH timing power supply outputs • Powerful music playing function, supports MPEG 1/2 Layer 3, WMA, WAV, OGG, APE, FLAC audio formats • Powerful media library function for flexible user management of the music documents according to actual requirement • Powerful audio effect processing function, supports 3D audio/sub-frequency/Play-FX sound effects • HiFi audio decoding • Supports HD microphone recording/line in recording/FM recording • Built-in HD FM radio FM 88-108MHz; supports recording the selected FM program freely • Supports visual remote control(visual remote control/non-screen remote control for selection)

    More »
  • Pre-amplifier EBS-2C

    EBS-2C Pre-amplifier

    • 10CH input channels including 5 microphone inputs, 3 standard line(AUX) inputs, 2 emergency line inputs • Microphone 1 takes the top priority input function, emergency inputs(ENC1/2) take the second priority, microphone(MIC 2/3/4/5)and line(AUX1/2/3) inputs take the third priority • Both microphone input channel and line(AUX) input channel have independent volume controls; ENC1/2 have no volume control; automatically ducking to -30dB; designed with independent treble and bass control

    More »
  • Power Sequencer EBS-3C

    EBS-3C Power Sequencer

    • Standard 2U height, Al alloy panel, LED indication • Microcomputer control, one second time interval of turning on each channel • 10CH power outputs • Electronic safety lock switch management, manually emergency control 10CH power outputs • 1CH short circuit signal input can trigger and turn on the equipment • Turning on the power in turn and vice versa to protect the equipments from current surge

    More »
  • PA System EBS-06M

    EBS-06M PA System

    • Built-in MP3 decode player and FM radio player, switchable play mode • Supports USB stick and SD card for song storage and convenient song changing, remote control for easy operation • Designed with 2 microphone inputs, 2 line inputs and 1 aux output • Two output modes: fixed voltage output 70V/100V,fixed impedance output 4~16Ω • Each channel has independent volume control, with treble/bass volume adjustment • Microphone1 has the top priority • Protection warning function: the corresponding LED lights up when clip/overload /thermal/short circuit protections happen

    More »
  • PA System EBS-12M

    EBS-12M PA System

    • Built-in MP3 decode player and FM radio player, switchable play mode • Supports USB stick and SD card for song storage and convenient song changing, remote control for easy operation • Designed with 2 microphone inputs, 2 line inputs and 1 aux output • Two output modes: fixed voltage output 70V/100V,fixed impedance output 4~16Ω • Each channel has independent volume control, with treble/bass volume adjustment • Microphone1 has the top priority • Protection warning function: the corresponding LED lights up when clip/overload /thermal/short circuit protections happen

    More »
  • PA System EBS-24M

    EBS-24M PA System

    • Built-in MP3 decode player and FM radio player, switchable play mode • Supports USB stick and SD card for song storage and convenient song changing, remote control for easy operation • Designed with 2 microphone inputs, 2 line inputs and 1 aux output • Two output modes: fixed voltage output 70V/100V,fixed impedance output 4~16Ω • Each channel has independent volume control, with treble/bass volume adjustment • Microphone1 has the top priority • Protection warning function: the corresponding LED lights up when clip/overload /thermal/short circuit protections happen

    More »
  • Power Sequencer EPO-802

    EPO-802 Power Sequencer

    • Designed with voltage display on the front panel for voltage stability real time monitoring • Automatically and sequentially turning on/off via the switch on the front panel • LED indication for each channel operation, independent switch control for each channel • Standard USB interface provides 5V power supply • An additional strong power socket on the front panel for convenient power supply of live application • 3 pin output sockets for wide applications • High quality relays for long service life

    More »
  • PA Power Amplifier EBS-24A

    EBS-24A PA Power Amplifier

    • Advanced high efficiency amplifying circuit, high output power and strong load capacity • Fan for heat dissipation and reliable operation • RCA/XLR connectors, adjustable volume • Protection warning function for abnormal operation • 2U standard enclosure design, Al alloy panel

    More »
  • PA Power Amplifier EBS-50A

    EBS-50A PA Power Amplifier

    • Advanced high efficiency amplifying circuit, high output power and strong load capacity • Fan for heat dissipation and reliable operation • RCA/XLR connectors, adjustable volume • Protection warning function for abnormal operation • 2U standard enclosure design, Al alloy panel

    More »
  • PA Power Amplifier EBS-100A

    EBS-100A PA Power Amplifier

    • LED for operating status indication, independent volume adjustment • Unique amplifying circuit • Ultra high power, stable and reliable performance • RCA and XLR connectors for convenient linking • Short circuit/overload/thermal protection • Automatic variable speed fan for heat dissipation • Standard enclosure design, 3U height Al panel

    More »
  • Ceiling Speaker Cabinet EBS-6C

    EBS-6C Ceiling Speaker Cabinet

    • Full range speaker cone, transparent tone, flat frequency response • Powerful clip for quick and convenient installation

    More »
  • Ceiling Speaker Cabinet EBS-10W

    EBS-10W Ceiling Speaker Cabinet

    • Clear and charming tone, flat music frequency response

    More »
  • Ceiling Speaker Cabinet EBS-25W

    EBS-25W Ceiling Speaker Cabinet

    • Rugged and waterproof Al enclosure • Transparent tone, exquisite contour, professional dust-proof design

    More »
  • Ceiling Speaker Cabinet EBS-45W

    EBS-45W Ceiling Speaker Cabinet

    • Rugged and waterproof Al enclosure • Transparent tone, exquisite contour, dust-proof design

    More »
  • Speaker Cabinet EKS-061

    EKS-061 Speaker Cabinet

    • EKS-061 is a built-in 2 way full range speaker cabinet • The 6.5 inch woofer features wide frequency response, clear vocal and high sensitivity • The 3 inch tweeter features exquisite tone • Clear and natural music/vocal performance

    More »
  • Power Amplifier EKA-D3A

    EKA-D3A Power Amplifier

    • Designed with microphone effect adjusting function • Balanced LF/MF/HF, low distortion, wide frequency response, vivid and prominent vocal • Automatic overload protection, air flow heat dissipation • 2~16Ωload capacity, 5 channel outputs including L/R channel, one mid and two surround outputs

    More »
  • KTV Speaker EKV-101

    EKV-101 KTV Speaker

    • EKV-101 consists one 10 inch 65mm voice coil woofer and one 36mm ferrite magnet steel HF with high polymer diaphragm, soft and delicate tone • The speaker cabinet endures wide dynamic power and keep stable performance for long time music playing • Glass fiber acoustic foam is used inside the cabinet to decrease the standing wave and increase the bass softness • The crossover uses MPT capacitor to extend the MF effect

    More »
  • KTV Speaker EKV-121

    EKV-121 KTV Speaker

    • 12 inch 65mm cone woofer features soft bass and clear tone layers • MgAl diaphragm 44mm ferrite magnet tweeter, up to 90*90 degree horn directivity • PP horn and tweeter together achieve soft and delicate HF tone • The speaker cabinet endures wide dynamic power and keep stable performance for long time music playing • Glass fiber acoustic foam is used inside the cabinet to decrease the standing wave and increase the bass softness • The crossover uses MPT capacitor to extend the MF effect

    More »
  • KTV Speaker EKV-151

    EKV-151 KTV Speaker

    • EKV-151 consists of one 15 inch 75mm voice coil cone woofer and one 63mm HF compression driver • The woofer adopts UKM cone for soft bass and clear tone layers • Symmetric magnet circuit for reducing the second harmonic distortion • HF driver uses 1.5 inch compression throat and wide directivity large POM horn for flat and delicate treble • The crossover components use low consumption OFC inductor, high quality polypropylene capacitors and heat dissipation resistors to ensure reliable performance and prominent tone • The trapezoidal enclosure eliminates the internal standing wave to achieve clean bass and flat frequency response

    More »


Anti-fake Check

TOP